Presetting The Channels Manually - Sony Trinitron KV-XA34 Operating Instructions Manual

Presetting the
channels
manually
To receive a new channel or a channel
with a weak signal, preset the channel
manually.
1
Press number buttons to
select the desired channel
number, then press ENTER.
2
Press ADD/ERASE.
"+" appears beside the
channel number, indicating
that presetting is complete.
Disabling channel numbers
By disabling unused or unwanted channel numbers, you can skip those channel
numbers when you press CH +/–.
1
Press CH +/– until the
unused or unwanted
channel number
appears on the screen.
2
Press ADD/ERASE.
"–" appears beside the
channel number, indicating
that disabling is complete.
To cancel the skip setting
Preset the channel again.
10
Using Your New TV
Tip
• You can also preset the channels manually using the menu (see Adjusting
each channel number settings (CHANNEL SETUP) on page 29).
1 2 3
Number
4 5 6
buttons
7 8 9
0
JUMP ENTER ENTER
TV/VIDEO FREEZE SWAP PIP
MENU
PIP CH
FAVORITE
PIP CH
SOUND
SURROUND WAKE UP SLEEP
MODE
VOL CH
CH +/–
CABLE AUTO PROGR ADD/ERASE
ADD/ERASE
1 2 3
4 6
5
7
8 9
0
ADD/ERASE
ADD/ERASE
+25
–25