TEFAL ClipsoMinut Perfect User Manual page 43

Problems
If steam leaks from
around the lid, check:
If you are unable to
open the lid:
If the food is not cooked
or is burned, check:
If food has burnt in
your pressure cooker:
If one of the
overpressure safety
systems is triggered:
If you notice the
appearance of
oxidation marks:
Think of the environment!
i Your appliance contains valuable materials which can be
recovered or recycled.
‹ Leave it at a local civic waste collection point.
* depending on model
Recommendations
The correct closure of the lid.
The position of the gasket.
The condition of the gasket; replace if necessary.
The cleanliness of the lid, the gasket and its hou-
sing in the lid.
The condition of the edge of the pan.
Check that the pressure indicator (D) is in the lo-
wered position.
Otherwise, decompress, if necessary, cool your
pressure cooker, under a stream of cold water.
Never interfere with the pressure indicator (D).
Rinse the seal under water and replace it in the lid
without drying it
insert it under each of the grooves on the lid.
The cooking time.
The power of the heat source.
The correct position of the operating valve (A).
The quantity of liquid.
Fill the pan with water and soak for a while before
washing.
Never use bleach or chlorine-containing chemicals.
Turn off the heat source.
Let your pressure cooker cool down without mo-
ving it. Wait for the pressure indicator to fall and
open the pressure cooker.
Check and clean the operating valve (A), the steam
release outlet, the safety valve and the gasket.
If the problem persists, have your pressure cooker
checked by a TEFAL Approved Service Centre.
The use of high performance stainless steel does
not prevent the appearance of oxidation in ex-
treme cases. If you notice oxidation marks, remove
them by rubbing with an abrasive sponge before
using your pressure cooker again.
- fig 19 and 15 and take care to
EN
41