Making Network Connections - Cisco 1003 User Manual

Making Network Connections

You must provide interface cables to connect the router to the Ethernet and WAN lines.
Note
Warning
lightning activity. (To see translated versions of this warning, refer to the section
"Translated Safety Warnings" at the end of this publication.)
To connect the cables to the router, perform the following steps:
Step 1
Refer to the section "Pinouts" for cable specifications.
Do not work on the system or connect or disconnect cables during periods of
Connect an Ethernet cable (not provided) to the 10BaseT (Ethernet) port on the
router. You'll need a straight-through Ethernet cable if you're connecting to an
Ethernet concentrator (or hub). Or you'll need a crossover Ethernet cable if you're
connecting to a personal computer (PC) Ethernet network interface card (NIC).
10BaseT port
Ethernet cable
Installing Your Cisco 1003 or Cisco 1004 Router
Cisco 1003 and Cisco 1004 User Guide 17
12VDC