Cisco ASR 900 Series Configuration Manual page 67

ITU-T G.8032 Ethernet Ring Protection Switching
Command or Action
Step 9
exit
Example:
Device(config-erp-ring-port)# exit
Step 10 exclusion-list vlan-ids vlan-id
Example:
Device(config-erp-ring)# exclusion-list
vlan-ids 2
Step 11
open-ring
Example:
Device(config-erp-ring)# open-ring
Step 12 instance instance-id
Example:
Device(config-erp-ring)# instance 1
Step 13 description descriptive-name
Example:
Device(config-erp-inst)# description
cisco_customer_instance
Step 14 profile profile-name
Example:
Device(config-erp-inst)# profile profile1
Step 15 rpl {port0 | port1} {owner | neighbor | next-neighbor
}
Example:
Device(config-erp-inst)# rpl port0 neighbor
Step 16 inclusion-list vlan-ids vlan-id
Example:
Device(config-erp-inst)# inclusion-list
vlan-ids 11
Purpose
Exits Ethernet ring port configuration mode.
Specifies VLANs that are unprotected by the Ethernet ring
protection mechanism.
Specifies the Ethernet ring as an open ring.
Configures the Ethernet ring instance and enters Ethernet
ring instance configuration mode.
Specifies a descriptive name for the Ethernet ring instance.
Specifies the profile associated with the Ethernet ring
instance.
Specifies the Ethernet ring port on the local node as the
RPL owner, neighbor, or next neighbor.
Specifies VLANs that are protected by the Ethernet ring
protection mechanism.
Note
LAN Switching Configuration Guide Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
Configuring the Ethernet Protection Ring
VLANs should be within or equal to VLAN
configured in the interface.
61