Cisco ASR 900 Series Configuration Manual page 10

Enabling EFD Notifications
SUMMARY STEPS
1. enable
2. configure terminal
3. ethernet cfm domain domain-name level level-id
4. service {short-ma-name | number MA-number | vlan-id primary-vlan-id | vpn-id vpn-id} {vlan vlan-id
| port | evc evc-name} direction {up | down}
5. continuity-check [interval time | loss-threshold threshold | static rmep]
6. continuity-check [interval cc-interval]
7. efd notify {g8032|rep}
8. end
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3 ethernet cfm domain domain-name level level-id
Example:
Router(config)# ethernet cfm domain Customer
level 7
Step 4 service {short-ma-name | number MA-number |
vlan-id primary-vlan-id | vpn-id vpn-id} {vlan vlan-id
| port | evc evc-name} direction {up | down}
Example:
Device(config-ecfm)# service s1 port
Step 5 continuity-check [interval time | loss-threshold
threshold | static rmep]
Example:
Router(config-ecfm-srv)# continuity-check
Step 6 continuity-check [interval cc-interval]
Example:
Device(config-ecfm-srv)# continuity-check
interval 10s
LAN Switching Configuration Guide Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
4
Purpose
Enables privileged EXEC mode.
Enter your password if prompted.
Enters global configuration mode.
Defines a CFM maintenance domain at a specified
maintenance level and places the CLI in Ethernet CFM
configuration mode.
Configures a maintenance association within a maintenance
domain and enters Ethernet connectivity fault management
(CFM) service configuration mode.
Enables the transmission of CCMs.
Configures the per-service parameters and sets the interval at
which CCMs are transmitted.
REP Access Gateway