DimSport F32 MYGENIUS User Manual page 7

1a) READING: select READING and follow the instructions.
MyGenius tool has now properly read the ECU. Unplug the OBDII cable from the car and connect the
USB cable to the MyGenius device and to the PC. To export the READING file from the device follow
the instructions of the chapter FILE DOWNLOAD on page 10.
1b) IDENTIFICATION ONLY: select ID and follow the instructions.
MyGenius tool has now properly identified the ECU. Unplug the OBDII cable from the car and connect
the USB cable to the MyGenius device and to the PC.
To export the ID file from the device follow the instructions of chapter FILE DOWNLOAD on page 10.
* If the tool does not identify the ECU and does not identify the correct protocol to use, please read the operations
of the chapter SPECIAL MANUAL PROCEDURES 1s) on page 13.
USER MANUAL
WARNING!
November 2017
Ver.2.06
Pag. 7/22