Special Manual Procedures - DimSport F32 MYGENIUS User Manual

Table of Contents

Advertisement

SPECIAL MANUAL PROCEDURES

The special manual procedure starts on the device ONLY if the MyGenius unit is not able to
automatically identify the software of the ECU.
1s) After the first failed attempt of automatic identification, MyGenius will guide you through the manual
reading procedure.
MyGenius will ask you to choose the correct protocol for your vehicle. IF more that one protocol is listed
contact your Master in order to know which one is the correct protocol to use.*
MyGenius has now properly
identified the correct
protocol. Click OK and start
the procedure for the
standard reading.
IF the client selects the wrong protocol for the manual reading,
before any new reading attempt it will be necessary to
In this case please refer to the RESET procedure, Case 1 on page 16.
USER MANUAL
MyGenius will ask you to choose the correct type of vehicle by
Manufacturer  Model  Type
* IMPORTANT!
November 2017
RESET
the MyGenius unit.
Ver.2.06
Pag. 13/22

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the F32 MYGENIUS and is the answer not in the manual?

Table of Contents

Save PDF