READING - PROTOCOL IDENTIFICATION
Depending on the vehicle brand the MyGenius device follows 2 different identification systems.
1. Total automatic protocol identification system (pg. 8)
2. Generic Brand Model Type protocol identification system (pg. 10)
For the VAG, PORSCHE, BMW, MINI, MERCEDES, SCANIA, JOHN DEERE vehicles the MyGenius
device is able to recognize the correct protocol without any customer selection. The following chart will
show you how to proceed for one of the above mentioned vehicle brands.
IF your vehicle brand is not one of the listed above please jump now to page 8
Connect the OBDII cable to MyGenius and to the vehicle diagnostic socket. On the device main menu
select WORK, it will start the automatic detection of the correct protocol to use.
MyGenius has properly identified the correct serial protocol for your car. Click OK and select WORK,
depending on the protocol the device will be able to perform the reading or the identification only of the
ECU software.
(1a) READING
1.Totally automatic identification system
November 2017
USER MANUAL
(1b) IDENTIFICATION
ONLY
Ver.2.06
Pag. 6/22
Need help?
Do you have a question about the F32 MYGENIUS and is the answer not in the manual?