Device Configuration - Vuvault; Default Configuration; Using Vuvault To Configure Your Firstvu Hd One - Digital-Ally FirstVu HD One Operation Manual

FirstVu HD One™ Operation Guide
Device Configuration – VuVault
The FirstVu HD One contains a default configuration and can be used immediately. It
may be reconfigured by activating the device using Digital Ally's optional VuVault™
back-office software (recommended), or the Mini Configuration Manager application
supplied on the FirstVu HD One product DVD. If you are using VuVault™, follow the
instructions in this section to configure and activate your FirstVu HD One. If you are
not using VuVault, skip to
configure your device.

Default Configuration

If the unit has never been activated, it will use the following default settings:

Using VuVault to Configure your FirstVu HD One

VuVault is used to manage FirstVu HD One settings as well as activate your device for
use within the system.
Before you can configure your device for
use within VuVault, the serial number must
be added into the system. Select
Admin>Devices>Add Device to add your
device into VuVault.
Type in your device serial number and
assign it a name within the system. When
done, select Close, then Save.
For more information consult the VuVault
Administrator's Guide "Adding Devices"
section.
Device Configuration – Mini Configuration Manager










You must upgrade VuVault to Version 4.7 (minimum) to configure and
activate a FirstVu HD One device. VideoManagerII and previous versions
of VuVault will not work with the FirstVu HD One.
Central Standard Time (UTC-6)
Daylight Saving enabled
Date format: Month/Day/Year
Time format: 12-hour
Pre-Event disabled
1280x720p record size/high record quality
Pre-Event Audio disabled
30 frames per second
Record LED enabled
Secure USB port disabled
Digital Ally, Inc. | Device Configuration – VuVault
860-00260-00 Draft 02
to
5