LG-Nortel iPecs LIP-8012D User Manual page 34

LIP-8012D & LIP-8024D User Guide
To place an ex
• Lift the ha
• Dial the C
• Dial the d
88 + Line number (01-42 for iPECS-100, or 001-
200 for iPECS-300 & 600).
CO/IP Group access—
801-820 for iPECS-100, or 801-872 for iPECS-
300 & 600
Any CO/IP Line access—
9
When dialing on a CO line which uses pulse sty
signals, you may activate
Switchover changing to DTMF style dialing (for bank
services, etc.).
When placing an IP call, you must dial an
using the '*' key in place of the dot.
If Least Cost Routing is set-up, the number you dial
will be analyzed and the syste
least expensive route.
You may be assigned Dialing and/or CO/IP Line
Access Restrictions, in which case you will receive
error tone if you attempt to dial or access a restricted
number/CO/IP line. CO/IP line and Station Class Of
Service (COS), which establish dialing restrictions, may
vary during Day and Night operation (Day/N
You may need to enter an
placing calls, in whic
dial tone.
Your external calls may be
Restrictions, you will receive a Call Warning Tone
prior to disconnect.
N OTE—In the event of an emergency, assigned
Emergency numbers (ex., a 911
from any station in the System, regardless of a
Station's dialing restrictions (COS).
ternal call:
ndset,
O/IP line/group,
esired number.
Dial Pulse to Tone
m will place the call on the
Authorization code
h case you will receive a second
subject to Call Time
27
Issue 1
IP address
ight COS).
before
call) may be dialed
August, 2008
le
ing