Table of Contents
Advertisement
To use this function:
1. Select the channel to be viewed in the 'Display Options for All Tools' box.
2. Select the correct range using the 'Play Controls' sub range slider.
3. Click the 'Pick Time' button.
4. Select the required pixel by click on its location with the mouse.
5. The cursor will change to an hourglass and the programme will run through
each frame and decode the selected pixel's value.
6. The progress bar will indicate the progress of the function.
7. To cancel this function at any time, click the 'Cancel' button.
8. When the programme has finished gathering the results, a new window will
open:
9. Once the graph is open the window needs to be closed before any other
functions can be used.
10. To change the channel or ranges close the window and start again.
38
Advertisement
Table of Contents
