Play Controls - Nac HotShot User Manual

between these two extremes. See 'Preferences' for further details. After data has been
captured clicking the trigger button will load the trigger frame into the viewing area.

Play Controls

Use this ...
Rewind
Step
Backwards
Play
Backwards
Stop
playback
Play
Forwards
Step
Forwards
Fast Forward
VIEW/ARM
TRIGGER
(software)
To do this...
Jump to the first frame of the recording, or the first
frame of the sub range (see below)
Step one frame backwards
Play the capture sequence backwards. Pushing this
button 2x will put the system into LOOP mode. The
system will keep looping about the sub range
Stop playback or looping playback
Play the capture sequence Forwards. Pushing this
button 2x will put the system into LOOP mode. The
system will keep looping about the sub range
Step one frame forwards
Jump to the last frame of the recording, or the last
frame of the sub range (see below)
Put the camera(s) into VIEW or ARM Mode.
Pushing this button once will put the camera into
VIEW Mode. A Live image will be displayed on the
screen and also through the sVGA Output of the
camera head if turned on.
Pushing the button a second time will put the camera
into ARM Mode. The camera is recording and waiting
for a trigger
Triggers the recording. This button will initiate a "stop
recording" sequence. Depending on the trigger settings
this will be immediate or after a given delay.
A hardware trigger via the BNC connection has the
same effect.
When?
After a
recording
After a
recording
After a
recording
After a
recording
After a
recording
After a
recording
After a
recording
When
you are
preparing
to make a
recording
When
you want
to record
23