Saving Out - Nac HotShot User Manual

Default Resolution
The default resolution allows you to reduce the Horizontal (and Vertical- optional)
resolution without needing to specify an AREA of Interest. This is useful if you are
using a Frame rate of more than 500fps and wish to avoid the "letter box" effect, or if
you wish to gain extra record time. Depending on you preferences, this option will
make the horizontal (or horizontal and vertical) resolution either half or quarter of the
maximum allowed. See also Preferences.

Saving Out

HotShot Link allows the saving out of recorded images, either separately or if there
are two cameras in the PC, two recorded images can be saved out joined together. A
comment typed here will be added to the frame information if frame information is
included on the image output. See 'Preferences' below.
To save out from a single camera:
1. First the range needs to be set of which frames are required to be saved out.
This can be changed by using the slider controls or the 'Mark In' and 'Mark
Out' button in the 'Play Controls'.
2. Click the 'Save As' button
3. The above window will appear, choose the 'Save Out Individually checked
Files' bullet, this is the default option. If the image size is too big, there is an
27