Table of Contents
Advertisement
Tools
Calibration
This tool is used to calculate basic depth correction. Click the
button will allow
the user to select two points on the image that the distance apart is known.
After clicking two points on the image you will see the dialog above. Enter the
distance apart of the two points and the units of measure. You can select the unit from
the drop down list or enter it manually. Click OK when you have finished. To reset
the calibration (to 1 pixel = 1 pixel) push the reset button.
Reticle
This tool is used to mark the image at specific points of interest. There are some
options available to aid the user. The user can have the software step through to the
next frame automatically by checking the 'Auto-Step to Next Frame' checkbox, then
the number of points on the image before stepping to the next frame, and whether to
burn the point's crosshairs onto the images when saving out and reviewing.
30
Advertisement
Table of Contents
