Table of Contents
Advertisement
2.
Highlight an effect from the list using the joy-
stick and press the Enter key to apply the
setting.
Frame
Use the Add Frame option to add frames to pic-
tures you capture.
To apply frames to photos:
1.
While in capture mode, select
Option > Frame.
2.
Highlight a frame from the list.
You can use the up and down joystick keys to
scroll through the other frames to view them
all.
3.
To select a frame, press the Enter key. The
selected frame is then displayed on the cap-
ture screen.
4.
To remove a frame, select
Option > Frame > No Frame.
While in capture mode, the side key is acts as
shortcut key to add frames. Press + or - to
scroll through frames or return to capture with
no frame.
Multi-Capture
The Multi-Capture enables multiple capture shots,
so the camera captures three or five shots with a
single click of the button.
To enable the multi-capture function:
1.
While in capture mode, select
Option > Multi-Capture.
2.
Select a number of shots. Select Deactivate
for standard single shots, or 4 Shot, 6 Shot,
or 9 Shot for multi-capture shots.
Capture Timer
Use the delay timer to add a delay time between
pressing the capture button and the picture actu-
ally being captured. This can allow enough time to
take pictures of yourself.
To set the capture timer:
1.
While in capture mode, select Option > Cap-
ture Timer.
2.
Select 5 sec, 10 sec, or 15 sec, or Deacti-
vate to turn the function off.
Default Storage
Use the default storage option to set where cap-
tured pictures are stored. You can store captured
pictures either in the handset (internal) memory, or
on a mini SD card if installed.
To set the storage option:
1.
While in capture mode, select
Option > Default Storage.
2.
Highlight Handset or Memory Card, then
press the Enter key to confirm.
69
Advertisement
Table of Contents
