Lexus 2013 IS250C Owner's Manual page 49

■
Setting and canceling the functions
To switch between setting and canceling, follow the procedure below:
Close both side doors and switch the "ENGINE START STOP"
STEP 1
switch to IGNITION ON mode. (Perform the step 2 within 20
seconds.)
STEP 2
Function
Shift position linked door locking
function
Shift position linked door unlock-
ing function
Speed linked door locking function
Driver's door linked door unlocking
function
When the setting or canceling operation is complete, both side doors are
locked and then unlocked.
1-2. Opening, closing and locking the doors and trunk
Shift the shift lever to P or N, press
and hold the driver's door lock
switch (
5 seconds then release.
The shift lever and switch positions
corresponding to the desired func-
tion to be set are shown as follows.
Use the same procedure to cancel
the function.
Shift lever position
P
N
or ) for about
Driver' s door lock
switch position
1
49