Qingdao Haier Telecom Co. Ltd.
· Press four
· Activate symbol mode.
· Enter the # symbol.
· Press and hold to enable or disable the vibrator .
· Press to switch between different input method in writing mode.
Network signal strength
New message received
Alarm clock on
Roaming service mode
Installing the Battery
1. Place the battery in the battery compartment.
2. Close the battery cover by sliding the cover upwards.
Removing the Battery
1. Turn off your phone.
2. Remove the battery cover by sliding the cover downwards.
3. Use your fingernail to gently lift the upper edge of the battery outwards.
4. Take out the battery.
times to enter 'T' in idle mode.
C1100_ Skylink _User Guide
Battery power level