Resetting The Headset - phaiser flexcore bhs-530 User Manual

ON / OFF-Function
Keep the call button on the right earphone
pressed for 3 seconds to turn the headset
On. You will hear the audio message "Power
On". You will see the indicator LED turn Blue
for a short time, then turn o if automatically
reconnected to your phone or stay Blue
while in pairing mode.
To turn o the headset, press and hold the
call button on the right earphone for 4
seconds until you hear the "Power O "
message. The indicator LED will turn Red
and then shut o .
If you leave your earbuds powered On and
walk away from them until they disconnect,
they will automatically power down after 5
minutes.

Resetting the headset

I n case you experience problems with
Pairing or issues with volume control,
resetting the headset may help: while not in
playback, press and hold all 3 control
buttons for about 10s until you hear a low
beep tone.
14