Turning Headset On /Off; Turn On Your Headset - phaiser BHS-710 User Manual

2) Press and hold the Power/Play button for about 5s, the indicator
light will flashes red and blue intermittently, the device is now in
pairing mode.
3) Find the Bluetooth® setting of your Mobile phone and start the
search for Bluetooth® devices. (For further details, please read
the operating instructions of your Mobile phone).
4) From the list of devices found, select the "BHS-710".
5) If required, enter the PIN code "0000" and confirm the entry. Once
the pairing process was successful, the BHS-710 will connect to
Mobile phone automatically then switch to standby mode, the
indicator will flash blue every 5 seconds.
Note:
1) If pairing is not completed within 2 minutes, the headset will turn
off. If this happens, please repeat the pairing steps.
2) The BHS-710 supports Multi-connection that allows for the
simultaneous use of the BHS-710 with two mobile phones. After
paring successfully with 2 mobile phones, switch off the headset
and switch on again, the headset will connect to both 2 mobile
phones automatically. Otherwise, you can connect the headset on
the cellphone manually.

8. Turning headset on /off

Turn on your headset

- ! - 7