Out Of Range - phaiser flexcore bhs-530 User Manual

Out Of Range

1. If headset and phone are separated by
more than 10 meters (33 feet), they will
disconnect.
2. In case headset and phone do not
automatically reconnect once back in
range, briefly press the multifunction
button on the right earphone to manually
reconnect. You can also use manual
reconnect to abort pairing mode and
connect to the last connected device.
3. While you are in multi connection mode, a
device which goes out of range, will lose
connection. The headset will keep trying
to connect to the lost device for 5
minutes.
4. In case you intentionally switched o the
Bluetooth function on a single connected
device and hear the "Disconnected"
message, you can immediately go to the
Bluetooth menu of your other device
(phone or tablet) to connect the headset
by using the regular pairing steps
described earlier. The headset will
become visible to other devices as soon
as all connections are dropped or it's
forced to pairing mode by pressing and
holding all 3 control buttons at the same
time for 3 seconds.
13