Table of Contents
Advertisement
3.3.1.3 DHCP Connection
If you choose DHCP connection type, you will see the following page.
LAN IP Address: Enter the IP address for the Device's LAN interface.
LAN Subnet Mask: Enter the subnet mask for the Device's LAN interface.
WAN MAC Address: This field displays the current MAC address of the WAN
interface. In most cases, you need not change it. But when using DHCP connection
type, your ISP may only allow one MAC address to be registered. To bypass this
restriction, you should enter the registered MAC address that is stored by your ISP.
Primary DNS Server: Enter the IP address of your ISP's primary DNS server.
Secondary DNS Server: Enter the IP address of your ISP's secondary DNS server
if it is available.
Figure 3-9 DHCP Connection Setup
Page 23
Advertisement
Table of Contents
