Table of Contents
Advertisement
3.3
Internet Connection
Click Start > Internet Connection，it will jump to Basic Setup > Internet Connection
page. This page lets you setup the Internet Connection, view its status, and modify or
delete it.
Note
1.
When you have finished the Internet connection setup, it is strongly recommended
that you go to Start > Network Security page to do essential security settings.
2.
If you change the IP address of the LAN interface during the connection setup, you
should use a new address to login to the Device. And the default gateway of each
LAN PC should use this new address to access Internet.
3.3.1 Internet Connection Setup
At first, please click the Default hyperlink of the connection entry in the Internet
Connection List (see Figure 3-6).
Then select Connection Type provide by your ISP.
Connection Name: The connection name is Default, which is reserved by system.
You can't modify it.
Physical Interface: The Default connection is bound to the WAN interface, you
can't modify it.
Connection Type: Select connection type from the radio boxes, which is provided
by your ISP, available options: PPPoE, Static IP and DHCP (Obtain an IP
automatically).
PPPoE: Some DSL-based Internet Service Providers (ISPs) use PPPoE
(Point-to-Point Protocol over Ethernet) to establish Internet connections for
end-users. If you use a DSL line, check with your ISP to see if they use PPPoE,
Page 17
Advertisement
Table of Contents
