Connection Of Signals As Events; Communication Ports - ABB SPA 650 Series Communication Protocol Manual

Section 3
SPA operation principle
3.1.2.4
3.1.3
18

Connection of signals as events

Signals coming from different protection and control functions and sent as events
to the station level over the SPA-bus (or LON-bus), are connected to the EVENT
function block as specified in Figure 4.
UL23RANG
IEC07000065 V2 EN-US
Figure 4: Connection of protection signals for event handling

Communication ports

The serial communication module (SLM) is a mezzanine module placed on the first
analog digital conversion module (ADM). It is used for LON, SPA, IEC
60870-5-103 and DNP communication.
In the following figure, X311 ports A/B are for SPA, IEC103 or DNP3 and X311
ports C/D are for LON protocol.
Block BLOCK
^INPUT1
ILRANG
^INPUT2
PSTO
UL12RANG
^INPUT3
^INPUT4
^INPUT5
UL31RANG
^INPUT6
3I0RANG
^INPUT7
3U0RANG
FALSE
^INPUT8
^INPUT9
^INPUT10
^INPUT11
^INPUT12
^INPUT13
^INPUT14
^INPUT15
^INPUT16
1MRK 511 418-UEN A
M11880-311 v5
EVENT
IEC07000065-2-en.vsd
M11880-315 v6
650 series 2.2 IEC
Communication protocol manual