Displaying Information On The Current Position; Your Own Points Of Interest; Data Format - Suzuki Infotainment System Operating Instructions Manual

50 | en
8.11 Displaying information on the
current position
f In navigation mode, tap 6.
f Tap Position and GPS info.
A map of the area around your position and the
following information are displayed:
Current road
f
f Current city
f Longitude
Latitude
f
f Altitude
GPS information
f
f Tap .
Note:
Tap 6 to close the options display.
8.12 Your own points of interest
In addition to the points of interest stored in the
navigation data, you can also store your own
points of interest and point of interest warnings
on the device.
Point of interest warnings may, for instance,
contain the location of sharp bends.
8.12.1 Data format
The file containing your own points of interest
must comply with the WGS84 standard.
The required file format is ".csv".
Each line of the file may describe one point of
interest containing the following pieces of infor-
mation:
f Longitude
Latitude
f
Name
f
f Address (optional)
Telephone number (optional)
f
A line of the file may look like this:
77.61,12.92,Park,Bangalore City,00917829
Notes:
Ensure that no piece of information
f
contains a comma. Inside the file,
commas are exclusively used to
separate the different pieces of
information from one another.
Coordinates of the southern and
f
western hemisphere have to be
specified by negative values.
The name of the csv file represents the name of
the point of interest category. When setting up a
csv file, be sure to insert only points of interest
that belong to the same category and use the
name of the category as the file name.
You may create up to four additional levels of
categories and subcategories if you create a
corresponding folder structure. The name of a
folder will be recognised as the name of the
corresponding category or subcategory.
Notes:
f The csv file or the top-level folder
that represents a top-level category
must be stored inside a folder
named "myPOIs". Place this folder
in the root directory of a USB stor-
age device.
A csv file that contains POI warnings
f
must be stored inside the folder
"myPOIs" or any of its subfolders.
The name of this file must begin
with "myPOIWarnings_" and end
with ".csv" (for example: "myPOI-
Warnings_Curves.csv"). Otherwise
the POI warnings cannot be dis-
played.
Navigation