Selecting The Map Orientation; Map View - On/Off; Enabling Automatic Zoom - Suzuki Infotainment System Operating Instructions Manual

Navigation
8.9.3 Selecting the map orientation
f Tap Map orientation.
f Tap the relevant item:
Heading up:
f
Map aligned with your heading
f North up:
Map aligned with north
Notes:
f In the map view, you can also
change the map orientation (see the
section entitled "Changing the map
view mode" (page 43)).
f If the North up option is selected,
3D map view is not available.
f Tap .
Note:
Tap 6 to close the options display.
8.9.4 3D map view – on/off
Instead of the normal view from above, the 3D
map view displays a perspective view.
f Tap 3D map.
3D map view is activated when the check mark
is displayed in the checkbox.
Notes:
You can also activate 3D map view
f
while in the map view (see the
section entitled "Changing the map
view mode" (page 43)).
f If 3D map view is activated, the
North up option is not available.
f Tap .
Note:
Tap 6 to close the options display.
8.9.5 Enabling automatic zoom
When automatic zoom is enabled, the navigation
system automatically adapts the map scale to
the route conditions (e.g. it zooms into the map
in urban areas or when approaching a junction
or a pending driving manoeuvre and zooms out
of the map on long straight-ahead stretches of
motorway).
f Tap Autozoom.
Automatic zoom is enabled when the check
mark is displayed in the checkbox.
f Tap .
Note:
Tap 6 to close the options display.
en | 47