Aux Audio Source; Enabling The External Dvd Input; Connecting A Device Via Bluetooth - Suzuki Infotainment System Operating Instructions Manual

Operation
f Hard Disk Drives (HDD) are not generally
supported.
f USB hubs are not supported.
Connecting and removing a USB storage device
or Apple device
To connect a USB storage device or Apple
device,
f connect it to the USB port.
A notification appears briefly in the display
when the device detects the USB storage device
or Apple device.
To remove a USB storage device or Apple
device,
f pull it out of the USB port.
An appropriate notification appears briefly in
the display.
4.11.4 AUX audio source
Note:
Only applicable if your vehicle is fitted
with an AUX input.
Connecting an AUX source
f Use a suitable cable to connect the AUX
source to the AUX input.
Note:
If you want to play a connected AUX
source, you must first enable the AUX
input (see below).
Enabling the AUX input
f In media mode, tap 6.
f Tap Aux active.
The AUX input is enabled when the check mark
is displayed in the checkbox.
f Tap 6 to close the menu.
4.11.5 Enabling the external DVD
input
f In media mode, tap
6.
f Tap DVD active.
The external DVD input is enabled when the
check mark is displayed in the checkbox.
f Tap 6 to close the menu.
4.11.6 Connecting a device via Blue-
tooth®
Notes:
Information about which external
f
devices the device supports is
available at www.suzuki-slda.com.
The procedures described in this
f
chapter apply to Bluetooth® mobile
phones as well as to Bluetooth®
audio streaming devices such as a
Bluetooth® MP3 player.
If a smartphone is already con-
f
nected to the device via smartphone
integration, it is not possible to
establish a Bluetooth® connection
to another mobile phone.
An existing Bluetooth® connection
f
will be disconnected automatically
as soon as another smartphone is
connected via smartphone integra-
tion.
General information
The device supports Bluetooth® 3.0 + HS and
the following Bluetooth® profiles and standards:
A2DP 1.2
f
AVRCP 1.3
f
f HFP 1.6
en | 25