Connecting A Smartphone Via Smartphone Integration - Suzuki Infotainment System Operating Instructions Manual

Operation
The rest of the connection setup process is
performed automatically. An appropriate
notification appears in the display.
f Method 3:
The mobile phone receives the device's PIN
and displays it.
f Check that the mobile phone is displaying
the correct PIN and then tap
f Confirm on your mobile phone that you
want to set up a connection.
If connection setup was successful, the mobile
phone will connect to the device.
Notes:
f If the connection attempt fails, a
notification is displayed. Make
another attempt at setting up a
connection from the mobile phone.
As soon as a new mobile phone is
f
connected to the device, the list of
calls appears in the display, and the
phone book and call lists are down-
loaded from the mobile phone onto
the device. The time required to
download the phone book and call
lists may vary depending on the
connected mobile phone.
Connecting an already paired mobile phone
The device stores the information for the 10 pre-
viously paired mobile phones. These mobile
phones are displayed in the Select Bluetooth
device menu.
To connect a mobile phone shown in this list,
f tap the relevant item in the Select Bluetooth
device menu.
. If connection setup was successful, the mobile
phone will connect to the device.
Deleting a paired mobile phone
To delete a paired mobile phone,
f tap 9 in the corresponding item of the
Select Bluetooth device menu.
The selected mobile phone is unpaired and
deleted from the list.
Notes:
f If the mobile phone is unpaired
during an active call, the call is
interrupted. The call can then be
continued on the mobile phone if
the mobile phone supports this.
f When the mobile phone is unpaired,
its phone book and call lists are also
deleted from the device.
To connect the mobile phone to the
f
device again, proceed as described
in the section entitled "Pairing and
connecting a mobile phone for the
first time" (page 26).
4.11.7 Connecting a smartphone via
smartphone integration
Notes:
f Information about which smart-
phones the device supports is avail-
able at www.suzuki-slda.com.
f A smartphone can be connected to
the device using the smartphone
integration function. The connec-
tion can be made via the USB port.
f A simultaneous Bluetooth® connec-
tion with another smartphone is not
allowed when a smartphone is
connected using the smartphone
integration function.
f You should disconnect any existing
Bluetooth® connection before con-
necting a smartphone using the
smartphone integration function.
If, however, you want to continue
using an existing Bluetooth® con-
nection, you should cancel the
smartphone integration setup pro-
cess.
If a smartphone is connected via
f
MirrorLink™ or Android Auto and a
Bluetooth® connection from the
same smartphone already exists,
the Bluetooth® connection will be
maintained.
en | 27