Getting To Know Your Wi-Fi Range Extender - Belkin F9K1015au User Manual

GETTING TO KNOW YOUR Wi-Fi RANGE EXTENDER

A
B
C
A) Wi-Fi Protected Setup (WPS) Light and Button (not pictured)
The WPS button on the top of your Range Extender can be used to help
establish a secure connection between your Range Extender and other
WPS-enabled Wi-Fi devices such as computers. To use the WPS feature
on your Range Extender, see "Advanced Settings > Wi-Fi Protected
Setup > Using Wi-Fi Protected Setup."
The small LED light near the WPS button shows what is happening while
you are using WPS to establish a connection.
Off: Idle
Blinking Blue: The Range Extender is listening for a WPS-enabled
computer or other device.
Solid Blue: The Range Extender has made a secure connection with the
computer or other device.
Blinking Amber: A connection was not created.
B) Status Light
Your Range Extender's status is shown by the light on the front.
Off: The Range Extender is not plugged into a power source.
Blinking Blue: The Range Extender is starting up.
Solid Blue: The Range Extender is connected to the Wi-Fi® network.
Solid Amber: The Range Extender is connected to the Wi-Fi network
but is experiencing a weak signal. A weak signal may lead to performance
problems. Consider moving the Range Extender closer to the
wireless router.
Blinking Amber: The Range Extender is not connected to the Wi-Fi
network. Check to make sure that your wireless router is functioning
properly, and/or move the Range Extender closer to the wireless router.
Alternating Blue/Amber: The Range Extender is ready to be set up.
(Refer to "Getting Started" for instructions on how to set up your
Range Extender.)
C) Reset Button (not pictured)
This button is used to restart your Range Extender in rare cases when
it functions incorrectly. Resetting the Range Extender will preserve your
settings. This button may also be used to restore the factory default
settings. Please see the Troubleshooting section for more information.
5