Connecting To Phoenix Terminal Connectors - Cobalt Digital Inc 9901-UDX Product Manual

Installation and Setup
Table 2-1 9901-UDX Rear Modules — continued
9901-UDX Rear Module
RM20-9901-XB-HV Expansion High-Ventilation
Rear Module
RM20-9901-XF-HV Expansion High-Ventilation
Rear Module

Connecting To Phoenix Terminal Connectors

9901-UDX-OM (V1.18)
Used in conjunction with high-ventilation base Rear
Module RM20-9901-B-HV to provide the following
additional connections:
• Four analog balanced audio I/O (
• Analog Y/composite, Pr/C, and Pb coaxial inputs
• Analog Y/composite, Pr/C, and Pb coaxial outputs
Note: • Analog inputs and outputs operational only with
Used in conjunction with high-ventilation base Rear
Module RM20-9901-F-HV to provide the following
additional connections:
• Two analog balanced audio I/O (
• Analog Y/composite, Pr/C, and Pb coaxial inputs
• Analog Y/composite, Pr/C, and Pb coaxial outputs
• Two fiber I/O (GUI configurable as I/O)
Note: • Analog inputs and outputs operational only with
Figure 2-4 shows connections to the card Phoenix™ terminal block
connectors. These connectors are used for card analog audio, serial comm,
and GPIO connections. These terminal blocks use a removable screw terminal
binding post block which allows easier access to the screw terminals.
9901-UDX PRODUCT MANUAL
Connecting To Phoenix Terminal Connectors
Description
; I/O function of each connection is
AN-AUD I/O 4
switch-configurable)
(Y IN, Pr IN, and Pb/C IN, respectively)
(Y OUT, Pr OUT, and Pb/C OUT, respectively)
appropriate card option +ANA and +ANV
installed.
• Available equipped with High-Density BNC
(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9901-XB-HV-HDBNC or
RM20-9901-XB-HV-DIN, respectively.
; I/O function of each connection is
AN-AUD I/O 2
switch-configurable)
(Y/CVBS IN, Pr IN, and Pb/C IN, respectively)
(Y/CVBS OUT, Pr OUT, and Pb/C OUT,
respectively)
appropriate card option +ANA and +ANV
installed.
• Available equipped with High-Density BNC
(HDBNC) or DIN1.0/2.3 connectors as:
RM20-9901-XF-HV-HDBNC or
RM20-9901-XF-HV-DIN, respectively.
thru
AN-AUD I/O 1
and
AN-AUD I/O 1
2-15