9901-Udx Video And Audio Options - Cobalt Digital Inc 9901-UDX Product Manual

Introduction

9901-UDX Video and Audio Options

Table 1-2 9901-UDX Video/Audio Options
Option
Note: Options are periodically added for this card. Check for latest options on the card web page at cobaltdigital.com. Most
options, in addition to licensing, require that card be loaded with the latest available firmware.
Video Options
Color Correction
Wings Insertion
Keying
Audio Options
Note: Software options below can be field-installed on a card without removal of the card from its frame.
®
Linear Acoustic
Loudness Processing
software
OGCP Loudness Meter
software
(Note 1)
®
Linear Acoustic
Upmixing software
(Note 2)
Automatic Downmixing
Automatic Audio Failover
9901-UDX-OM (V1.18)
In addition to the I/O options described in Table 1-1 above, the 9901-UDX
offers several video and audio options described in Table 1-2. Note that
several options also require a rear I/O option that supports the video and/or
audio options described here; the complete option requirement is specified in
Table 1-2.
Description
In addition to standard video proc controls,
provides independent RGB channel controls
for luma, black, and gamma.
Provides wings insertion using an independent
SDI input provided for wings insertion, with
software-configurable insertion width/pan
controls.
Provides keying using independent SDI inputs
for key and fill signals. Also provides a
separate dedicated key preview SDI output.
®
Linear Acoustic AEROMAX
stereo audio output loudness processing;
several combinations available
5.1-channel loudness meter in accordance with
EBU R128, ATSC A/85 and ITU BS.1770.
Allows OGCP-9000 to provide user interface.
®
Linear Acoustic AUTOMAX™ converts legacy
stereo program audio (from any source
received by the card) to 5.1-channel audio.
Provides a stereo downmix from selected
alternate multi-channel sources if selected
primary L/R channels lose signal.
Provides failover to alternate ("secondary")
channels to substitute for the primary channels
in the event of audio signal loss.
9901-UDX PRODUCT MANUAL
9901-UDX Functional Description
Option/Rear Module Package
• Option +COLOR
Refer to option Manual Supplement
OPT-SW-F3GWINGS-MS for
description and signal connection
information.
Refer to option Manual Supplement
OPT-F3KEY-MS for description and
signal connection information.
®
5.1-channel or • Option +LP51 (5.1-Ch loudness
processing)
• Option +2LP20 (dual independent
stereo loudness processing)
• Option +LP20 (stereo loudness
processing)
• Option +LM
• Option +UM
• Option +ADM
• Option +AFO
Required
1-7