Page 1
MALLOCA VITROCERAMIC AND INDUCTION COMBINED HOB MODEL:DZ/C - 9304 Distributor in Viet Nam: BACH HOP KITCHEN APPLIANCE COMPANY LIMITED 279 Nguyen Van Troi Street, Phu Nhuan Dist Ho Chi Minh City, Viet Nam : (08) 3 9975893 - (08) 3 9975894...
Dear Valued Customers: before installation. It is advisable to have professionals to install. We thank you for choosing MALLOCA Combined Hob series. Please be ◆ It is necessary to separate product base with a board, and keep 5cm between them.
Page 3
◆There are few possibilities in the event the hob stop operating, it is because the temperature Demonstration of the product has exceeded the customary temperature. At this moment, the power supply will automatically disconnected. When the temperature cools down, it will work again. burner 1100 W burner...
Page 4
Touch control household combined hob ◆ The heating area error will turn off the heating area which has fault, and Item No. DZ/C-9304 the relative heating area will alternatively display ”E” and one bit error code. General Fault Code Rated voltage...
Page 5
standby or working state. It will unlock the touch controller, the child lock indicator ◆ The residual heat will be displayed at the fourth LED of the heating area of display,and there will turn-off, and all the touch key can be used normally again. will display ”H”.
Page 6
Operation Guide for Induction Hob the alarm will disappear in 2 minutes. ON/OFF of Heating Area ◆ It is set to press any button for 0.3 seconds, but if the ON/OFF button is pressed ◆ Connect the appliance to the power supply. Touch the ON/OFF button (button 1) over 0.3 seconds, and keep longer than 0.8 seconds, the hob will turn-off for about 0.8 second.
Need help?
Do you have a question about the DZ/C-9304 and is the answer not in the manual?
Questions and answers