Changing The Speaker's Gender; Repeating The Current Prompt; Repeat The Previous Prompt, Your Last Response, And The Current Prompt; Erase Your Current Response And Repeat The Current Prompt - Vocollect Talkman A500 Hardware Documentation

5. When the voice is speaking as quickly or as slowly as you want, press the Operator button to save the
new speed setting.

Changing the Speaker's Gender

Make sure the device is on or sleeping. The LED indicator should be either solid green or blinking green
(A500, T5-series and T2-series) or solid green (T1).
1. Press the Operator button.
The device says "Current operator is operator name . Select menu item."
2. Press the + or — button until it says, "Change speaker."
3. Press the Operator button.
If you use the + button to scroll through the options, Change Speaker is the sixth menu item in the list.
4. Press the + or — button to hear the next speaker.
The device says, "This is female" when it toggles to the female voice, or "This is male" to indicate the male
voice.
Note: You can exit this menu without changing the settings by pressing the Play/Pause button before
you press the Operator button.
5. When you hear the speaker you want to use, press the Operator button to select that speaker.

Repeating the Current Prompt

• Say "Talkman continue."
The device repeats the current prompt.

Repeat the Previous Prompt, Your Last Response, and the Current Prompt

Note: As of VoiceClient 3.4, this feature is disabled by default.
1. Say "Talkman repeat."
The device repeats the previous prompt, repeats what you said in response to that prompt, and then
repeats the current prompt.
2. Respond to the current prompt.

Erase Your Current Response and Repeat the Current Prompt

Say "Talkman backup" or "Say again."
The device erases any response given to the current prompt and then repeats the prompt again.
OpenTopic | Talkman Devices | 27
®