CONTENTS Safety Precautions ..................................3 Read Before Operating Equipment ............................3 Unit Care Recommendations ..............................3 Introduction ....................................4 Features ....................................4 Package Contents ...................................4 Product Specifications .................................5 Video Format Supported ................................ 5 Audio Format Supported ................................ 5 ................................5 Wireless Connection Transmitter Front ..................................6 ..................................7 Transmitter Back Receiver Front...
SAFETY PRECAUTIONS Keep the product away from Keep the product out of reach of external heat sources such as children. heaters or stoves. If there is any unusual sound, Keep the battery of remote control smoke or odor coming from the out of reach of children.
INTRODUCTION HD FLOW3 Wireless AV Multi Display System provides Full HD 1080p signal transfer, including 3D signal*, without the hassle of running cables. Create brilliant HD quality multimedia for signage, presentations, or entertainment in any location, completely un-tethered to your source device! By simply connecting the Transmitter to a multimedia device such as a computer, set-top box, or Blu-ray™...
PRODUCT SPECIFICATIONS HD-W300R 3x HDMI up to 1080p60 1x HDMI pass-thru output (pass-thru port mirrors HDMI 1) Video Input 1x PC Video (Transmitter) 1x Component & composite (via included dongle) 1x HDMI up to 1080p60 Video Output 1x Component (Receiver) 1x Composite H.264 Baseline Profile...
Transmitter Front Power/Link Indicator Light • Blinking indicator light - Establishing link between the Transmitter and the Receiver. • Solid indicator light - Link between the Transmitter and Receiver has been established and is ready for signal transmission. HDMI 1 •...
Transmitter Back HDMI 1 IN • HDMI1 input port. HDMI Pass-Thru • Outputs a duplicate of the source that is plugged into HDMI 1. HDMI 2 IN • HDMI2 input port. HDMI 3 IN • HDMI3 input port. • USB port is used for service only. IR-OUT •...
Receiver Front Power/Link Indicator Light • Blinking indicator light - Establishing link between the Transmitter and the Receiver. • Solid indicator light - Link between the Transmitter and Receiver has been established and is ready for signal transmission. HDMI • The HDMI indicator light will be illuminated when the HDMI port is selected for video output.
Receiver Back 1. HDMI-OUT • HDMI output port 2. AV-OUT • Composite video output port 3. IR-IN * • Connects IR Extender in order to extend IR reception range. 4. AUDIO-OUT ** • 3.5mm stereo audio output port for component output. 5.
Remote Control POWER ON Button • Turns the Transmitter and Receiver power ON POWER POWER POWER OFF Button • Turns the Transmitter and Receiver power OFF INFO/OK* • Displays the following information on the screen: Transmitter - WiFi IP, LAN IP, and Source SCAN MENU / BACK...
INSTALLATION AND OPERATION Before starting the installation, please ensure that all source components (Blu-ray player, cable box, etc.) and the display equipment (TV, display, projector, etc.) are turned off. For initial setup of your HD FLOW3 system complete steps A, B, C, D, E and F in order. A) Connecting Source Components To The Transmitter HDMI Media Source •...
d. Composite Media Source • Video – Connect “yellow” composite video RCA to green port on Component/Composite Adaptor. • Audio – A 3.5mm stereo audio cable is required (not included) to transmit audio when using this input. Connect the 3.5mm stereo audio cable from the VGA source component’s audio output to the Transmitter's PC AUDIO-IN port.
D) Connecting The Receiver To The Display Device Note: Connect the Receiver to the display device using the port with the highest capable resolution; HDMI port is preferred. The HD FLOW3 is a video switch, and as such will upconvert all inputs with resolutions of 480p, 720p, and 1080i/p through the HDMI Output.
Multicast Mode - Pairing Additional Receiver(s) With The Transmitter (Optional) Multicast Wireless Mode enables the Transmitter to stream AV media from one Transmitter to up to six Receivers. Note: Your HD FLOW3 Wireless AV Multi-Display System comes pre paired. This section is only needed if you have separately purchased additional Receiver(s).
Tips If the Transmitter and Receiver are not establishing a connection: It is recommended to unplug the power to both units for 30 seconds and then plug them back in. If the above tip does not assist, please reference the Factory Reset section of this manual. If the connection has been established and the HD FLOW3 logo can be seen on the display device, but content is not playing when initiated: Ensure that source cables are properly connected.
Supported Video Formats Video HD FLOW Transmitter HD FLOW Receiver Resolution Standard HDMI D-Sub AV(CVBS) HDMI COMP AV(CVBS) 640 x 480p60 640 x 480p70 640 x 480p85 800 x 600p60 800 x 600p70 800 x 600p85 1024 x 768p60 1024 x 768p70...
COMPLIANCE STATEMENTS FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
WARRANTY 1 YEAR LIMITED WARRANTY The HD FLOW3 offers the highest quality components and technology available. The product is warranted to be free from defects in material and workmanship, given normal use and care, for 1 Year from the original purchase date with proof of purchase. Please retain a copy of your receipt as you will need this to obtain warranty work.
Page 19
Wireless Full HD Sender Receiver www.hdflow.co.kr I DO IT Co., Ltd. #637, Smart-Hub Industry-University Convergence Center, 237 Sangidaehak-ro, Siheung-si, Gyeonggi-do, Korea Tel : +82 (0)31 8041 1500 Fax : +82 (0)31 8041 1550 E-mail : sales@hdflow.com I DO IT France 6-8 Rue de la Closerie ZAC Du Clos Aux Pois 91090 LISSES Cedex FRANCE Tel : +33 (0)1 64 97 52 28 Fax : +33 (0)1 64 97 52 35...