Resolve A Subnet Conflict To Access The Switch - NETGEAR GS908E User Manual

8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E
The switch reboots. Your switch web session is disconnected and you must log back in to the local
browser interface.

Resolve a Subnet Conflict to Access the Switch

If you power on the switch before you connect it to a network that includes a DHCP server (or a router that
functions as a DHCP server), the switch uses its own default IP address of 192.168.0.239. This subnet might
be different from the subnet used in your network.
To resolve this subnet conflict:
1. Disconnect the Ethernet cable between the switch and your network.
2. Unplug the power adapter of the switch.
3. Reconnect the Ethernet cable between the switch and your network.
4. Plug the power adapter of the switch into an electrical outlet.
The switch powers on. The DHCP server in the network discovers the switch and assigns it an IP address
that is in the correct subnet for the network.
Diagnostics and Troubleshooting
73