Manage Custom Performance Preset Modes; Save Your Quality Of Service Settings As A Custom Preset Mode - NETGEAR GS908E User Manual

8-Port Gigabit Ethernet Smart Managed Plus Switch Model GS908E
a. Click the STORM CONTROL RATE tab.
b. Click the EDIT button.
The EDIT STORM CONTROL RATE page displays.
c. For each port for which you want to set storm control rate limits, select the rate in Kbps or Mbps
from the individual menu for the port.
The default selection is No Limit.
d. Click the APPLY button.
Your settings are saved and the EDIT STORM CONTROL RATE page closes.

Manage Custom Performance Preset Modes

You can save your current Quality of Service (QoS) settings as a custom preset mode, including the settings
for IGMP snooping, flow control, the power saving mode, the QoS mode, rate limiting settings, and the
priorities of the individual ports.
In addition to the default Standard Preset mode, the switch lets you save two custom preset modes. You
can also rename or delete these custom preset modes.

Save Your Quality of Service Settings as a Custom Preset Mode

You can save your current Quality of Service (QoS) settings as a custom preset mode that you can reapply
later.
To save your QoS settings as a custom preset mode:
1. Open a web browser from a computer that is connected to the same network as the switch or to the
switch directly through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
The login page displays.
3. Enter the switch password.
The default password is password. The password is case-sensitive.
The HOME page displays.
4. From the menu at the top of the page, select ADVANCED SETTINGS.
The PRESET MODES page displays. The LOAD tab is automatically selected.
5. Click the SAVE tab.
The SAVE PRESET MODES page displays.
6. In the Preset Mode Name field, enter a name from 1 to 16 characters for the custom preset mode.
7. Select the Slot 1 or 2 button.
You can save two custom preset modes, one in each slot.
8. Click the APPLY button.
Your settings are saved. The preset custom mode is displayed on the PRESET MODES page.
Optimize the Switch Performance
28