Connecting To Your Device - Zte WF824 Getting Started

WF824 Getting Started

Connecting to Your Device

WF824 is a user-friendly wireless access terminal, and very easy to configure and setup. Subscribers can
just connect the device to their computer or home switch/router and the device is ready to provide Internet
Services.
WEB Login
It is a preferred to setup the CPE using a Web browser from a local PC connected to device LAN port.
The user should ensure that the connected PC is able to acquired IP address via DHCP from the device.
After IP connectivity is established between the PC and CPE device the user may launch a Web browser
http://10.1.1.1
and specify in the address bar. A window will pop up requesting to enter a password.
Input the default user login password and then click the "Log in" button. After successful log on, the
default home page of the WEB GUI interface will appear. Note that the default user password is
"user123". The admin password is protected and only available to the network operator.
Device Status
Once the user is logged in, the following window device status window will be prompted for viewing. It
contains both the wireless link information, networking, and device information configured for the device.
The wireless info provides detailed information about the radio connection and the user can use this
information to determine the receiving signal strength and transmit power of the device. Click the
"Advanced" button to get more configuration options.
Confidential and Proprietary Information of ZTE CORPORATION 6