FrontRow Juno Connect Configuration Manual page 10

e. Local Area Connections Properties (Windows)
1. In the General tab, highlight the Internet Protocol Version 4 (TCP/IPv4) or Internet Protocol
(TCP/IP) item, and click Properties.
This opens the Internet Protocol (TCP/IP) Properties window.
6. In the General tab, click Use the following IP address, and enter:
• IP address: 192.168.1.100
• Subnet mask: 255.255.255.0
• Default gateway: Leave blank
NOTE: We recommend 192.168.1.100 as the standard IP address; however, you may need to use a different
address if you are using a local switch already using this address
7. Leave the Use the following DNS server addresses fields blank
8. Click OK.
9. Click OK to close each window
NOTE: to change your computer back to DHCP follow the same process but select "Obtain an IP
address automatically" from the General network page.
7