Using Snmpv3 Protocol; About Snmpv3 - Epson FX-890IIN Network Manual

FX-890IIN/FX-2190IIN/FX-2175IIN Network Guide
Default Policy:
❏ IPsec/IP Filtering: Enable
❏ Access Control: Refuse Access
Group Policy:
❏ Enable this Group Policy: Check the box.
❏ Access Control: Permit Access
❏ Remote Address(Host): IP address of a client
❏ Method of Choosing Port: Service Name
❏ Service Name: Check the box of ENPC, SNMP, HTTP (Local), HTTPS (Local) and RAW (Port9100).
Receiving access from a specified IP address only
This example allows a specified IP address to access the printer.
Default Policy:
❏ IPsec/IP Filtering: Enable
❏ Access Control: Refuse Access
Group Policy:
❏ Enable this Group Policy: Check the box.
❏ Access Control: Permit Access
❏ Remote Address(Host): IP address of an administrator's client
Note:
Regardless of policy configuration, the client will be able to access and configure the printer.

Using SNMPv3 Protocol

About SNMPv3

SNMP is a protocol that carries out monitoring and control to collect the information of the devices that are connected
to the network. SNMPv3 is the management security feature version that has been enhanced.
When using SNMPv3, state monitoring and setting changes of the SNMP communication (packet) can be
authenticated and encrypted in order to protect the SNMP communication (packet) from network risks, such as
wiretapping, impersonation, and tampering.
Security Settings
47