S&P ARTIC TOWER M Installation Manual And Operating Instructions page 11

- Children must be supervised to ensure that they do not play with the product.
Before carrying out any maintenance work, or during long periods without use, make
-
sure that the device has been disconnected from the mains.
Only for internal use
-
3. FITTING INSTRUCTIONS (Fig.1)
- Join the two parts that form the base of the unit
- Pass the power cable between the two halves of the base.
Join the base to the fan body, using the two thumbscrews supplied for this purpose.
-
Fix the power cable in the two rear clips under the base, to prevent the fan from being
-
unstable
4. USING THE FAN AND CONTROL FUNCTIONS
ARTIC TOWER M Model – (Fig.2)
- Check that the supply voltage matches the rated voltage on the characteristics plate,
before connecting the device
- Through the rotary switch, select the operating mode:
OFF
ARTIC TOWER E Model – (Fig.3)
-
After verifying that the supply voltage matches the characteristics plate, connect the
device to the ductwork.
Control the different functions either using the buttons on the fan's control panel or
-
with the remote control.
- There is an illuminated panel that indicates the operating speed and timer mode.
- ON/OFF With the button ON/OFF, controls the power to the fan.
Operating mode
Stop
Slow speed
Medium speed
Fast speed
Slow speed with oscillation
Medium speed with oscillation
Fast speed with oscillation
11