HPE FlexNetwork 10500 series Configuration Manual page 297

Field
Module
Level
Mnemonic
Source
Content
Table 26 Timestamp precisions and configuration commands
Item Destined to the log host
Precision Seconds
Command
used to set the
info-center timestamp loghost
timestamp
format
Table 27 Description of the timestamp parameters
Timestamp
Description
parameters
Time that has elapsed since system startup,
in the format of xxx.yyy. xxx represents the
higher 32 bits, and yyy represents the lower
boot
32 bits, of milliseconds elapsed.
Logs that are sent to all destinations other
than a log host support this parameter.
Current date and time, in the format of mmm
dd hh:mm:ss yyy for logs that are output to a
log host, or MMM DD hh:mm:ss:xxx YYYY
date
for logs that are output to other destinations.
All logs support this parameter.
Timestamp format stipulated in ISO 8601.
iso
Only logs that are sent to a log host support
this parameter.
No timestamp is included.
none
All logs support this parameter.
Description
Specifies the name of the module that generated the log. You can enter the
info-center source ? command in system view to view the module list.
Identifies the level of the log. See
levels.
Describes the content of the log. It contains a string of up to 32 characters.
(In standalone mode.) Optional field that identifies the source of the log. The
value contains a card slot number and the IP address of the log sender.
(In IRF mode.) Optional field that identifies the source of the log. The value
contains an IRF member device ID, a card slot number, and the IP address of
the log sender.
Provides the content of the log.
286
Table 18 for more information about severity
Destined to the console, monitor
terminal, log buffer, and log file
Milliseconds
info-center timestamp
Example
%0.109391473 Sysname
FTPD/5/FTPD_LOGIN: User ftp
(192.168.1.23) has logged in successfully.
0.109391473 is a timestamp in the boot
format.
%May 30 05:36:29:579 2003 Sysname
FTPD/5/FTPD_LOGIN: User ftp
(192.168.1.23) has logged in successfully.
May 30 05:36:29:579 2003 is a timestamp
in the date format.
<189>2003-05-30T06:42:44
Sysname %%10FTPD/5/FTPD_LOGIN(l):
User ftp (192.168.1.23) has logged in
successfully.
2003-05-30T06:42:44 is a timestamp in
the iso format.
% Sysname FTPD/5/FTPD_LOGIN: User
ftp (192.168.1.23) has logged in
successfully.
No timestamp is included.