Table of Contents
Advertisement
Access Control
Figure 3-12 Access Control Screen
NOTE: As administrator, can customize this configure to limit different
workstation or subnet using different password with different Access Type. While
different workstation or subnet using itself password with Read/Write Access
Type to login, only allow modifying the inSentry parameters and itself Access
Type, to prevent someone arbitrarily change unless it login with Admin
password.
Trap Receivers
Figure 3-13 SNMP TRAP Screen
Email Notification
Figure 3-14 Email Notification Screen
28
This page displays a list of the
workstation enabled for read/write
access to inSentry.
This page can hold a maximum of
four entries. It holds the list of the IP
address
of
the
Management Stations (NMS), which
will receive the SNMP traps send by
inSentry.
This page describing of inSentry
email notification setting to let
administrator configure Mail server
and Mail receiver in order to receive
notification or report from inSentry
by email once sensor event was
occurred.
Network
Advertisement
Table of Contents
