IBM inSentry-man-E210 User Manual page 16

Setting Access Control Table
If you wish to use a workstation with SNMP Manager installed, or if you wish to set
more restrictive inSentry access, you can use the access table to add the IP
address of the PC's on which you wish to modify the access permissions (see
Figure 2-16).
NOTE: The configuration of Access Control Table is configured for SNMP and
HTTP Network Management. Access through TELNET or RS-232 is permitted only
when using the "Community Read/Write" password in Control Group.
NOTE: The community strings entered in the Community String fields are visible
only in the RS-232 connection. The TELNET connection does not display the
string. An asterisk "*" will be shown in the field.
NOTE: If a "NotAccess" access right is associated with an IP address, the
associate workstation will not be able to display any information regarding the
inSentry, even if the Community Read-Only string is entered.
16
Access Control Table
Figure 2-16