Table of Contents
Advertisement
Setting Control Group
From the configuration menu, press "2" to modify the access password and
enabled/disabled status of the available network protocols (see Figure 2-10).
Figure 2-10 Control Group Configuration Menu
No. Function
1.
HTTP Login UserName HTTP access login string
2.
Community Read-Only General password for read-only access
3.
Community Read/Write
4.
BOOTP/DHCP Control Enable/disable the BOOTP/DHCP protocols Disable
5.
TFTP Upgrade Control
8.
PING Echo Control
7.
Telnet Control
9.
HTTP Control
8.
SNMP Control
After completing these settings, press "0" to return to the configuration menu.
Setting Parameter Group
From the configuration menu press "3" to modify the SNMP identification
information, and the speed of reading data from inSentry (see Figure 2-11)
Figure 2-11 Parameter Group Configuration Menu
Description
Administrator password for read and write
access
Enable/disable the TFTP protocol for
firmware upgrades through the local network
Enable/Disable inSentry to response to Ping
request.
Enable/disable the TELNET protocol
Enable login and password request for HTTP
access
Enable login and password request for SNMP
access
Example/Remark
"inSentry"
"public"
"admin"
Enabled
Enable
Enable
Enable
Enable
13
Advertisement
Table of Contents
