Activating And Starting Cruise Control - Volvo XC40 Owner's Manual

•
Reactivating Cruise Control from standby
mode (p. 262)
•
Switching off Cruise Control (p. 262)
28 Cruise Control
Activating and starting Cruise
Control
28
The Cruise Control (CC ) function must be
selected and activated in order to regulate
speed.
Note: This illustration is general and details may vary
depending on model.
Putting Cruise Control in standby mode
To put Cruise Control in standby mode:
–
Tap ◀ (1) or ▶ (3) and scroll to the
(4) function.
> A symbol will appear and Cruise Control
can then be activated.
DRIVER SUPPORT
Activating/starting Cruise Control
In order to start Cruise Control from standby
mode, the vehicle's current speed must be
30 km/h (20 mph) or higher. The lowest speed
that can be set is 30 km/h (20 mph).
To start Cruise Control:
–
With the function displayed, press
(2) on the steering wheel keypad.
> Cruise Control will be started and the
vehicle's current speed will be set.
NOTE
Cruise control can then not be connected at
speeds below 30 km/h (20 mph).
Related information
•
Cruise control (p. 258)
259