Advertisement
POWERING DOWN AND DETACHING THE BATTERY
STEP 1
Remove the Ethernet cable from the ethernet
adapter.
STEP 2
Unplug the connector cable by using the handle.
Remove the Ethernet adapter by pulling straight in
the direction as shown.
STEP 3
Press and hold the power button for 5 seconds to
switch off your iSavi™.
Power Button
12
STEP 4
The powering down process takes about 20
seconds.
Wait until all the LEDs are off.
STEP 5
Pull down the battery latch in the direction as
shown.
STEP 6
Remove the battery pack gently.
Note:
Ensure your iSavi
is off before removing the
TM
battery pack.
The battery pack can be charged seperately
without being attached to your iSavi
Battery latch
.
TM
Advertisement
