Table of Contents
Advertisement
Alternative views
For your convenience, two alternative views are available.
"Time Line" offers an overview of the delay time applied to each of the 15 delay lines. It is very convenient for
setting delay times in relation to one other.
"Mix View" provides an overview of the effects applied to the source and the 15 delay lines. You will probably use
this view to adjust a same effect on all 16 elements.
You can select a "view" by using this selector:
Please note that the "Global Delay" settings are not available from these alternative views. Settings related to this
special delay line are only accessible from the "Main View".
A. Time Line
Use these menus for a quick access to base divisions and multipliers.
Select the 'KNOB' mode from the right menu to freely set the position of the "point"
corresponding to a delay line.
The delay time of each
delay line is represented by
a circled point.
Click here to quickly set all 15
delay times.
Click here to select which parameter (Output level or
Feedback) is controlled by vertical mouse drag actions.
User manual
If a delay line is inactive, its
circled point is displayed in red.
When the 'feedback' value (cf.
Classic View) is different than –inf.,
several points may be visible.
horizontalement sur la ligne
correspondante.
The transparency of a point gives an indication
about the output level (opaque = 0dB).
You can move points
horizontally to set delay
time.
Select these controls to
display different guides
(vertical bars).
Use this control to zoom
in/out.
23
Advertisement
Table of Contents
