Table of Contents
Advertisement
1. Saturation
You can choose from 7 types of saturation / distortion.
2. Filters
These two filters provide a way to pass frequencies within a range defined by a low and a high cutoff
frequency (they will attenuate frequencies outside this range).
High-pass filter – Cutoff frequency.
User manual
ERD-1 adds presence to the signal while giving it a vintage character. It has an
obvious impact on mid frequencies while lowering the presence of high
frequencies. ERD - 1 is particularly suitable for the creation of distinct
elements in the context of a rhythm line.
'VBs' are emulations of tube saturations. They will add some warmness to the
signal as an old guitar preamp would do. VB - 2 is a more aggressive version of
the VB-1 module.
These modules could probably be compared to overdrive/distortion like those
we find on a guitar pedal. DIS-1 provides an overdrive-like saturation while
DIS-2 has been designed to be very destructive.
'VAs', as 'VBs', are emulations of tube saturations.
However, VAs affect low and high frequencies more than VBs do (VBs have a
more important impact on med frequencies).
Low-pass filter – Cutoff frequency.
19
Advertisement
Table of Contents
