Delay Time - eaReckon EARebound User Manual

6. Delay Time

Division multiplier
Once the base division is defined, you can
apply a multiplier to it.
For example, you can select the same
base division for all delay lines and then
apply a different multiplier to each of
them in order to control regular "steps"
of a rhythm line.
22
Base Division
The base division combined with a multiplier defines
the applied delay time according to the current
tempo.
0 x 1/16-> No delay
1 x 1/16-> 1/16
2 x 1/16-> 1/8
...
Delay time
If the base division is set to 'KNOB', you can
set delay time regardless of the current
tempo.
Otherwise, this control is disabled and the
displayed value indicates the applied delay
time in milliseconds (as defined by the
tempo, the base division and the multiplier).
eaReckon EARebound