Table of Contents
Advertisement
Main View
A. Global Settings
Global settings are only accessible from the 'Classic View'. They have an overall impact on the plug-in (and not
only on the source or a delay line in particular).
These parameters are mostly related to inputs and outputs of EARebound.
Input level.
Amount of input signal sent
to delay lines.
(1) Output mode
EARebound has 3 pairs of outputs and features
two output modes.
Stereo : in this mode, the "Aux" (and "LFE") outputs are unused and the vertical
position of the 'position' control is ignored.
Multi Channel : in this mode, the vertical position of the 'position'
control can be used to adjust the level of the selected delay line
(or source) sent to "Main" and "Aux" outputs.
More information about output modes is available on the next page.
(2) Low frequency settings
If "Split LF" is enabled, low frequencies (as defined by the "XOVER" parameter) are processed
differently.
You can "monoize" LF by activating the
Finally, you can adjust the level of low frequencies by using the "LF GAIN" potentiometer.
Should you want to keep your LF settings untouched when browsing presets, please activate the
switch.
The "Pre/Post" option is described on the next page.
User manual
This fader can be used to define the proportion of
processed/unprocessed input signal to be sent to delay
lines.
switch.
Dry (unprocessed) / Wet (processed) mix.
Overall output
level.
Output mode (1).
Low frequency settings (2).
15
Advertisement
Table of Contents
