Outback OUT370610/PH200T Assembly And Operating Instructions Manual page 5

ASSEMBLY
IMPORTANT!
Whilst every care is taken in the manufacture of this product, care must be taken
during assembly in case sharp edges are present.
Please read the Important Information section carefully before assembly.
1
1-1. Put the 3 pcs post brackets on each position on the base as shown
in the picture.
1-2. Use 3 Medium Bolts(M8x16) to join the post brackets and stand.
2
2-1. Put the post on the top of 3 pcs post brackets.
2-2. Use 6 Large Bolts and Flange Nuts (M6) to connect the post to the
3 pcs post brackets. Tighten the bolts and nuts.
Square metal
support
Bolt
Post
5
Stand
Bolt
Nut